Editing way points in VSF

General support questions about VSF, like installasion, settings etc. can be posted here. Check that the question has not already been raised, first.

Editing way points in VSF

Postby ilan » Tue Nov 01, 2011 8:15 am

Dear All,

Following a question i received, i wish to explain how way points are edited on the map and associated
with each boat/vehicle in Vehicle simulator.

In Vehicle Simulator waypoints are associated with each boat / vehicle, so you have
to take special care when defining them on the map:

To define waypoints for a specific boat

1. select that boat first ( pick upon it on the map ), you will see the waypoints of this vehicle appear on the map.

2. edit and move those points by pressing edit button and then selecting and moving each point.

3. when done editing press on a blank part of the map to deselect your boat, and the waypoints of all boat will appear.

4. to define a new waypoint deselect the edit mode ( must be turned off ) then select the boat you wish to add waypoint to, and then select the place you wish to add waypoint and press "Add".

I attach a few pictures to make this clearer, remeber to edit waypoints of a boat it must be selected, to add or remove to this boat it must be selected and edit turned off, to add to all no boat is selected.

waypoints.jpg
Thank you,

Ilan Papini
Quality Simulations
http://www.hangsim.com
http://www.qualitysimulations.com
User avatar
ilan
 
Posts: 151
Joined: Mon Jun 16, 2008 7:01 am

Re: Editing way points in VSF

Postby Victor » Tue Nov 01, 2011 9:44 am

Many thanks for this explanation. I shal make it into a sticky as it is question many have asked.

Victor
User avatar
Victor
Forum Administrator
 
Posts: 1232
Joined: Mon Jun 16, 2008 10:07 am
Location: France
Preferred Sim: Vehicle Simulator

Re: Editing way points in VSF

Postby itsme » Tue Nov 01, 2011 11:46 am

It is all so easy once a good explanation is there. Thanks Ilan.
Cheers, Reino.
User avatar
itsme
 
Posts: 820
Joined: Mon Jun 16, 2008 5:32 pm

Re: Editing way points in VSF

Postby pijlmans » Wed Feb 17, 2016 8:54 am

Got it, Thanks.
Up until december I could add to all ships and they d all go to that point.
today I can only add waypoints as shown above, there is no add to all it seems, or did I switch something off that I shouldnt have.

pijlmans.
He who turns around, always pulls the blankets.
User avatar
pijlmans
 
Posts: 354
Joined: Tue Jul 10, 2012 9:04 pm
Location: the Netherlands
Preferred Sim: Vehicle Simulator


Return to VSF Support

Who is online

Users browsing this forum: No registered users and 1 guest

cron