Good afternoon! I've been working with a Submarine and I've had some trouble figuring out how to make it reverse.
Currently, top speed (Full Throttle) is 120 RPM and around 12 Knots.
And minimum speed (Zero Throttle) is 0 RPM and obviously, 0 Knots.
However, I've got no clue how to make it reverse, as in, that when going below the "*0*" displayed on the Throttle, the submarine would go in reverse.
Any clues on how can I work on this?
Thanks in advance!!
Submarine - Reverse
-
- Posts: 99
- Joined: Sun Mar 07, 2021 2:13 am
Re: Submarine - Reverse
Click Shift-E, and you engage reverse...click Shift-E again, and you engage forward.
There used to be an option to choose throttle mode, allowing > 50% throttle engages forward, < 50% throttle engages reverse...50% throttle is 'neutral'. Not sure if that still works.
There used to be an option to choose throttle mode, allowing > 50% throttle engages forward, < 50% throttle engages reverse...50% throttle is 'neutral'. Not sure if that still works.
-
- Posts: 2
- Joined: Tue Apr 23, 2024 8:49 pm
Re: Submarine - Reverse
Thank you for the answer!Sailorjohn wrote: ↑Wed Apr 24, 2024 3:41 pm Click Shift-E, and you engage reverse...click Shift-E again, and you engage forward.
There used to be an option to choose throttle mode, allowing > 50% throttle engages forward, < 50% throttle engages reverse...50% throttle is 'neutral'. Not sure if that still works.