The HangSim new Forum

Good afternoon! I've been working with a Submarine and I've had some trouble figuring out how to make it reverse.

Currently, top speed (Full Throttle) is 120 RPM and around 12 Knots.



And minimum speed (Zero Throttle) is 0 RPM and obviously, 0 Knots.



However, I've got no clue how to make it reverse, as in, that when going below the "*0*" displayed on the Throttle, the submarine would go in reverse.

Any clues on how can I work on this?

Thanks in advance!!

Click Shift-E, and you engage reverse...click Shift-E again, and you engage forward.

There used to be an option to choose throttle mode, allowing > 50% throttle engages forward, < 50% throttle engages reverse...50% throttle is 'neutral'. Not sure if that still works.

Sailorjohn wrote: ↑Wed Apr 24, 2024 3:41 pm Click Shift-E, and you engage reverse...click Shift-E again, and you engage forward.

There used to be an option to choose throttle mode, allowing > 50% throttle engages forward, < 50% throttle engages reverse...50% throttle is 'neutral'. Not sure if that still works.

Thank you for the answer!